Product Details:
|
Product Name: | 3A Molecular Sieve Of 0.5-0.9 Mm For Insulating Glass Using | Diameter (mm): | 0.5-0.9 |
---|---|---|---|
Bulk Density (g/ml): | 0.74-0.80 | Static Water Absorption (%): | ≥20.0 |
Crushing Strength (N): | ≥5 | Dust (Turbidity Meter) Ppm: | ≤30 |
High Light: | glass filling machine,desiccant filler |
3A Molecular Sieve of low dust content 0.5-0.9 mm for Insulating Glass Using
Molecular Sieve Kation-DF-S
The insulating glass special molecular sieve is specially designed for the insulating glass industry,
it has the characteristics of high selective adsorption,. low dust content, high abrasion resistance
and sufficient strength, it provides excellent comprehensive performance for insulating glass,
completely solve the problem of ordinary insulating glass molecular sieve desiccant easy to
make insulating glass explosion or dew caused by expansion or contraction, fully guarantee
the safety and energy saving of insulating glass.
1. Highly selective adsorption
With uniform adsorption hole size, it can absorb sprayable vapors and hydrocarbons.
Inside the insulated glass unit, eliminating absorption of nitrogen and other mixed gases
Insulated glass unit provides complete dew point protection.
When the second glass reaches the photoelectric switch at the end of the inspection frame
In the mounting machine, the glass slows down and stops at the glass positioning position. Aluminum
The frame positioning system starts to move automatically, and the aluminum frame positioning system
It will be put in place with glue. If there is a problem with the glass, after removing it
Turn on the foot switch again to start transmission. The next piece of glass is framed as the second piece of glass.
When assembling the aluminum frame, the user can adjust the position adjustment handwheel on the glass side
Aluminum frame placement, depending on the need to achieve different double component adhesive depths.
2. Low dust content
Special manufacturing technology, the product has a very low dust content and is suitable for all kinds of molecules
Sieve filling machine, avoid static electricity during use.
The first glass after inspection is eligible to enter pressure into the thickness of the photoelectric material section
Slow stop, start automatic measurement of glass thickness (if wrong thickness mode does not stop)
Set here directly to the pressure plate section), the thickness after input, or part of the flat section, forward
Positioning distance, lateral positioning block flip seal plate, conveyor belt, glass flipped for positioning
Open the piece stop position and side seal plate. The clamp closed at the stop position, the moment before pressing the sync
The nous belt transmission is raised and the chuck begins action and absorbs the glass before pushing the glass plate torque.
It then sends a sync belt and opens it to its initial position in front of the board.
3.Compatibility
The scientific formula and advanced technology ensure the physical adsorption performance of the
products, do not corrode the spacers (aluminum, stainless steel, PPT and other materials), and have
good compatibility with the related materials of insulating glass
Max. glass size | 2500mm*3500mm |
Max glass size for filling gas | 2500mm*3200mm |
Min. glass size | 280mm*450mm |
Glass thickness | 3-15mm |
Insulating glass thickness | 60mm |
Glass washing speed | 2-10m/min |
Glass conveyor speed | 45m/min |
Washing brushes | 3 pairs of soft brushes with 0.1mm hair |
Water supply | Water consumption:0.5t/h conductivity:40μs/cm |
Air supply | Flow: 0.8m/min |
Air pressure | ≥0.8MPa |
Total power | 3P 380V 50HZ 40KW |
Dimension | 23500*3500*3700mm |
Weight | 6500kg |
Contact Person: Miss. Rose
Tel: +86 18678875966
Fax: 86-0531-85960498