|
Product Details:
|
| Product Name: | 3A Molecular Sieve Of 0.5-0.9 Mm For Insulating Glass Using | Diameter (mm): | 0.5-0.9 |
|---|---|---|---|
| Bulk Density (g/ml): | 0.74-0.80 | Static Water Absorption (%): | ≥20.0 |
| Crushing Strength (N): | ≥5 | Dust (Turbidity Meter) Ppm: | ≤30 |
| Highlight: | 0.5mm 3A Molecular Sieve,0.9mm 3A Molecular Sieve,0.9mm molecular sieve type 3a |
||
3A Molecular Sieve of low dust content 0.5-0.9 mm for Insulating Glass Using
Molecular Sieve Kation-DF-S
The insulating glass special molecular sieve is specially designed for the insulating glass industry,
it has the characteristics of high selective adsorption,. low dust content, high abrasion resistance
and sufficient strength, it provides excellent comprehensive performance for insulating glass,
completely solve the problem of ordinary insulating glass molecular sieve desiccant easy to
make insulating glass explosion or dew caused by expansion or contraction, fully guarantee
the safety and energy saving of insulating glass.
1.Highly selective adsorption
Homogeneous adsorption pore size, it can absorb vapor and hydrocarbons that can be atomized
inside the insulating glass unit, and exclude the absorption of nitrogen and other mixed gases
in the insulating glass unit, providing full dew point protection.
when the second piece of glass arrives at the photoelectric switch at the end of the inspection frame
mounting machine, the glass decelerates and stops at the glass positioning place. The aluminum
frame positioning system moves out automatically, and the aluminum frame positioning system
with the glue is put in place. If there is any problem with the glass, after removing it, step on the
foot switch again and start transmission. The next piece of glass will still be framed as the second piece.
When assembling aluminum frame, users can adjust the adjustment handwheel of glass side positioning
and aluminum frame positioning according to the need to realize the depth of different double-component glue.
2.Low dust content
Special manufacturing technology, the product has very low dust content, suitable for all kinds of molecular
sieve filling machine, and avoid static electricity in the use process.
first glass after inspection qualified to enter the pressure into the material section thickness in photoelectric
slow stop, start automatically measuring the thickness of the glass (if wrong thickness mode does not stop
here directly into the pressure plate section), thickness after entering or piece of flat section, to set forward
positioning distance, lateral positioning block flip seal plate, conveyor belt, inverted the glass to the locating
piece stop position, open the side seal plate. Clamp closed to moment before pressing stop location, synchro
nous belt transmission is raised, before pressing glass plate torque, chuck started action, will glass to absorb,
and then transmitted synchronous belt, open to the initial position before the board.
3.Compatibility
The scientific formula and advanced technology ensure the physical adsorption performance of the
products, do not corrode the spacers (aluminum, stainless steel, PPT and other materials), and have
good compatibility with the related materials of insulating glass
| Max. glass size | 2500mm*3500mm |
| Max glass size for filling gas | 2500mm*3200mm |
| Min. glass size | 280mm*450mm |
| Glass thickness | 3-15mm |
| Insulating glass thickness | 60mm |
| Glass washing speed | 2-10m/min |
| Glass conveyor speed | 45m/min |
| Washing brushes | 3 pairs of soft brushes with 0.1mm hair |
| Water supply | Water consumption:0.5t/h conductivity:40μs/cm |
| Air supply | Flow: 0.8m/min |
| Air pressure | ≥0.8MPa |
| Total power | 3P 380V 50HZ 40KW |
| Dimension | 23500*3500*3700mm |
| Weight | 6500kg |
Contact Person: Miss. Rose
Tel: +86 18678875966
Fax: 86-0531-85960498
