High Strength Stainless Steel 6A 3003 Aluminum flat Strip

   High-strength stainless steel gray aluminum strip 6A for insulating glass

Insulating Glass Aluminum Spacer Bar 6A

Cleaning and drying section tilted vertical placement. The control box is arranged on the outside

of the cleaning section for easy operation. The cleaning section and water tank are made of

stainless steel and corrosion resistant materials. The transfer roller is acid-alkali rubber roller.

The cleaning and drying section adopts stepless frequency conversion speed regulation, and

the glass can run smoothly at the appropriate speed. In the cleaning section, three pairs of

brushes are cleaned with high-pressure water sprayer, which can clean low-e glass. There

is a pair of inclined air knives with baffle in the middle of the drying section, which can be

adjusted automatically according to the distance between two air knives with different

thickness of glass, thus ensuring the effect of air drying. The fan is 11KW.
automatic button, in the work in the page the "two bo mode" and "inflatable model" are pressed,

and then click on the "thickness" or click on the "glass" parameters input and the thickness of the

glass and aluminum frame width (choose one), if you need to online automatic detection, is the

"pneumatic automatic detection" press, and set to gas concentration; If online testing is not

required, the "automatic inflation detection" is not followed, and the inflation time is set according

to the size and thickness of the glass and the width of the aluminum frame. Automatic cleaning

machine button.

Product Description and advantage:
1. Material:3003 alloy aluminum
2.5.5mm side welding line,100% guarantee bendable.
3. wall thickness is within 0.30~ 0.35mm,and tolerance is ±0.025mm.
4. Appearance:Surface is Bright smooth and has no knocking. Air hole is uniform and in order.
5. It conforms to the standard requirement of “Insulating Glass
6.Size:5.5mm-35mm.

first glass after inspection qualified to enter the pressure into the material section thickness

in photoelectric slow stop, start automatically measuring the thickness of the glass (if wrong

thickness mode does not stop here directly into the pressure plate section), thickness after

entering or piece of flat section, to set forward positioning distance, lateral positioning block

flip seal plate, conveyor belt, inverted the glass to the locating piece stop position, open the

side seal plate. Clamp closed to moment before pressing stop location, synchronous belt

transmission is raised, before pressing glass plate torque, chuck started action, will glass

to absorb, and then transmitted synchronous belt, open to the initial position before the board.

first glass after inspection qualified to enter the pressure into the material section thickness

in photoelectric slow stop, start automatically measuring the thickness of the glass (if wrong

thickness mode does not stop here directly into the pressure plate section), thickness after

entering or piece of flat section, to set forward positioning distance, lateral positioning block

flip seal plate, conveyor belt, inverted the glass to the locating piece stop position, open the

side seal plate. Clamp closed to moment before pressing stop location, synchronous belt

transmission is raised, before pressing glass plate torque, chuck started action, will glass to

absorb, and then transmitted synchronous belt, open to the initial position before the board.