Stainless Steel And Aluminum ±1º Spacer Bending Machine

The bending machine can bend stainless steel and aluminum bar accurately in 2020

                                      ALL THE IG PRODUCTS ARE 20% OFF ON JUNE,2020

TQuality improvement is the use of glass, zheng valve for high visible light, infrared low transmittance, good hundred can effect and route OWE more rich with the popularity of OW glass line, OW who glass product prices down gradually before can accept by most users, also for LOwE exhaust wide basis with domestic set out to wash and phosgene, step in the home half fold solution solved and equipment, the price is far lower than the imported equipment and gradually accepted by domestic and foreign customers, and entered the domestic high-end glass deep processing factory, in the domestic production line with LOwE glass, The quality of the glass processing plant was improved because of the material barrier for LOWE's glass

Application

For example, the equipment has the function of bending warm edge spacer
1. How do warm edges heat up
2. Set the temperature of the warm edge strip
3. Adjustment of warm edge cutter head
4. Setting and action of warm edge parameters

Equipment details

• Material rack can be placed at the same time four specifications of aluminum bar, from the outside and inside are respectively 6A,9A,12A,12A above. The innermost group of feed tank is the common feed tank.
  The plug should be inserted into the middle position, and the plug should be kept level with the aluminum strip or droop slightly, not upwarped, otherwise it will affect the receiving material.Use hexagon socket to fix the saw to cut the screw hole on the left side, and use a wrench to screw the screw on the right side of the saw blade.
  Open the saw with hexagon socket to cut the left passport screw, fix the right pulley of the saw blade, and screw the left side of the saw blade with a wrench. Pay attention to the serrated direction when installing the new saw blade.If you want to adjust the depth of the tool head position, loosen the two screws in the left picture and move the tool head seat upward. When the tool head is pressed down, it becomes lighter. When the tool head is pressed down, it becomes deeper.
   

• USB input function, read the excel format file directly etc (Optional)

• Precise bending effect, corner error less than 0.1mm.

• Spacer printing code function (Optional)
• Connect to ERP system (Optional)
• Heavy duty connectors is convenience and safety for installation and debugging

• Spare parts of all machine have ID codes.
• Automatic drill gas filling hole (Optional)
• Printing paper label sticker function (Optional)
• n.
• Electrical parameters

• NAME	BRAND	NAME	BRAND
  PLC	GERMAN SIEMENS	Triplet	Taiwan AIRTAC
  Low voltage electrical apparatus	GERMAN SIEMENS	Cylinder	Taiwan AIRTAC
  Servo motor	GERMAN SIEMENS	Solenoid valve	Taiwan AIRTAC
  Servo driver	GERMAN SIEMENS	Switch power	Taiwan TEND
  Relay	JAPAN OMRON	TOUCH SCREEN	Taiwan WEINVIEW
  Sensor	KOREA AUTONICS	GUIDE	Taiwan TBI