glass washing machine CP-2500A used for cleaning and drying the upper and lower surfaces of ordinary plate glass and high quality low-e glass,it is composed of incoming segment, cleaning air-drying segment and outgoing segment.
1.Aluminum alloy assembled structure, no scrap concept, permanent use, high efficiency, energy saving 70% efficiency; 2.The rest of the sheet metal parts are sprayed with advanced mechanical paint or powder;
4.The washing part in contact with water is made of stainless steel; 5.Cleaning department, wind staff overall lift, the maximum lift: 350mm,easy to clean and maintain;
6.Three pairs of brush(Ø150mm)Stainless steel shaft configuration (low-e glass, ordinary coated glass and sunshine coated glass can be washed without damaging the coated surface);
Item.
Spec.
Maximum glass width
2500mm (effective maximum: 2650mm)
Minimum glass specification
400mm×400mm (limited to single row on left and right sides)
Glass thickness
3mm-25mm (digital display)
Speed range
glass thickness within 3-25mm Vmax=1-12m/min
Main drive, brush speed regulation
method
frequency control
Table height
900±25mm
Total power
42KW(water-bearing wind heating: 15KW)
Water source
self-circulation, tap water (according to civil water standards) and deionized water water supplement (deionized water equipment
shall be provided by the buyer)
Power source
380V 50Hz
Dimensions (length × width × height)
approximately 6260*4800*3100
Weight
3940kg
Above Information is the Specification of Jinan LIJIANG Glass Technology Standard.
If customers want to change the Specification, Please let us know.