Glass Cleaning And Drying Machine / Horizontal Glass Washing Machine

Structure features

* The main drive adopts gear transmission, frequency conversion speed regulation, cleaning brush roll rotation has the upper and lower two groups of motor independent belt transmission, the rotation is stable and the service life is prolonged, and the special glass with independent cylinder lifting and lifting is used to realize the cleaning of special glass.

* Aluminum alloy assembly structure, no scrapping concept, permanent use, high efficiency, energy saving up to 70% efficiency.

* Spray plastic outside the whole sheet metal part of the frame.

* The whole machine conveying rubber roller (75 mm) adopts the vulcanized rubber full-wrapped stainless steel shaft structure (it is forbidden to contact the acid liquid).

* The bearing seat of the whole machine adopts a novel waterproof and wear-resistant bearing seat which is independently developed and developed.

* The cleaning part and the water contact part are all made of ssus304 stainless steel material.

* Three pairs of brush (about 160 mm) stainless steel shaft (washable LOW-E glass ordinary coated glass, do not damage the surface of the film.

Cleaning section, wind cadres can take up and down 300mm as a whole (easy to clean cots, roller brushes and equipment maintenance

* Two pairs of special stainless steel aluminum alloy wind knife configuration, wind air drying effect with good heating system.

* The air inlet of the air chassis is equipped with air filter, and a variety of silencing measures and exhaust devices are adopted in the air knife area to ensure that the noise is low and the interference is low. The whole air chassis is installed in the upper part of the studio to facilitate cleaning and inspection.

* The water tank of the cleaning machine can be moved, which is convenient for the water tank cleaning and water exchange inspection, so that the cleaning effect of the cleaning machine is cleaner.

* The intelligent display of touch screen is convenient for manual operation, and the operation is simple and the connection is the best configuration to reduce labor.

Technical meters

* Maximum glass width: 2600mm

* Min glass specification: 350*350mm (limited to single row feed on both sides of the left and right sides)

* Glass thickness: 3--25mm

* Cleaning speed range: glass thickness within 3-19mm Vmax=1--12m/min

* Main transmission speed adjustment mode: variable frequency speed regulation

* Table height: 900mm (adjustable)

* Total power of the whole machine: 30KW

* Power supply: 380V 50Hz.

* Water source: self-circulating deionized water (deionized water equipment).

* Weight: approx.3800 KG

* Overall dimension (mm):5850 * 3100 * 3200 (long * wide * height)

Main configuration and characteristics

*Machine frame: steel plate bending + spray (ensure that the frame does not change and water does not penetrate into the steel plate)

*Transmission support: custom thickened profile (ensure the smoothness of the transfer roller and does not rust, firm and durable)

*frequency converter: Taida

* PLC: Taida

* Touch screen: Kunlun, Beijing

* Motor and speed reducer: Zhejiang custom-made

* Electrical components: Debussy

* High-pressure fan: Foshan, Guangdong

*Water pump: customized in Shanghai.

* Transmission rubber roller: vulcanized rubber full-wrapped stainless steel shaft head structure

* Brush: Anhui (using nylon hard brush and nylon soft brush).

* All water-related gold and air knives are stainless steel

* Waterproof effect (up and down with three layers of protection to ensure that there is no leakage)

*Wind knife: self-made stainless steel aluminum profile assembled

* Cover: the protective cover of the whole machine is made of sus304 stainless steel

* Other components: standard

Inspection

The acceptance criteria shall be tested: according to the guidelines given in GB/ T1.1 -2009 according to the standard, the glass shall be checked with black background fluorescent lamp, the vertical direction of glass shall be free of water, dry and free of scratch, and the glass shall be free of deviation, no catch and no roller printing.