|
Product Details:
|
| Name: | Sealant Pump Of Insulating Glass Using | Advantage: | Easy Operate And Ecnomic Cost Solution |
|---|---|---|---|
| Pump: | Korea Pump | ||
| High Light: | double glazing production,insulating glass line |
||
Manual sealing machine included silicom pump freezer and rotated table for insulating glass
LIJIANG GLASS- FOR WORLD GLASS MANUFACTURE SEIVICE
Sealant-spreading Machine LJST02A
Main feature
• Imported motor system to improve equipment efficiency
• Imported sealant gun,stainless steel mixer
• High pressure protect device
• Anti-back flow control structure
• Mixed rate detector can control the rate of two kinds of glue
Technical data
| Working air pressure | 0.3-0.6MPa |
| Sealant spreading pressure | 15-20MPa |
| Sealant volume | 4L/min |
| Diameter of A/B sealant | 570mm/280mm |
| Sealant spreading air pressure ratio | 50:1 |
| Mixed rate | 6:1-14:1 |
| Air supply | Flow 0.8m3/min |
| Air pressure | ≥0.8MPa |
| Overall dimension | 1100*950*1630mm |
APPLICATION
This equipment was designed by advanced technology from abroad and inside of China. It is special equipment used for spreading the two-component polysulphide glue and/or two-component silicone structure glue for the aluminum type insulating glass or curtain wall glass.A and B pump adopt Korea brand HASCO.So it can ensure the reliable working-effect.
Special and convenient mixed device can ensure the high quality mixing of the two-component polysulphide glue and/or two-component silicone structure glue. This equipment is featured by uniform mixture and continuous stability of extruded glue, good spreading effect and high production efficiency.
►►►►►KOREA PUMP USING
►►►►►SEALING GUN ADN SEALING REASULT SHOWING
Freezer OF INSULATING GALSS PROCESSING LJSGF01
Main feature
• It is used for storing the gun when manual glue gun stop work during the process of gluing insulating glass
• Storing at low temperature,to prevent sealant solidify
• Apply to polysulfide and silicone
• Can be effectively reduced waste when cleaning the glue
| Max refrigerating temperature | 70ºC |
| Min heating temperature | -40ºC |
| Total power | 3.8kw |
| Refrigerating | <150min |
| Overall dimension | 1550*60*1300mm |
LJCJ03 Gas filling machine
1.Four pieces IGU can be gas filled at the same time within 20s (1m*1m glass).
2.Pressure alarm device:when the gas filling is up to adjusted value,it will alarm and stop automatically.
3.The filling process can display on the touch screen.
4.Gas content setting: the customer can set the argon content in the IGU according to his own needs.
5.The whole filling process and argon gas content can be displayed on the screen, and the argon gas content can be observed in real time.
Manual sealing machine included silicom pump freezer and rotated table for insulating glass
Argon gas filling machine LJCJ02
Main technical parameter
| Power supply | 220V 50Hz |
| Total power | 0.1kw |
| Dimension | 620*439*700mm |
Contact Person: Miss. Rose
Tel: +86 18678875966
Fax: 86-0531-85960498
