Structural characteristics:

• Aluminum alloy assembly structure, no scrap concept, permanent use,
  High efficiency, energy saving 70% efficiency;

  2. The remaining sheet metal parts are sprayed with advanced machinery

  Paint or powder;

  3. Rubber rollers are made of vulcanized rubber with stainless steel shaft.

  4. The cleaning part that comes in contact with water is made of stainless steel.

  5. Cleaning department, lift of the whole wind staff, maximum lift: 350mm, easy to clean and maintain.

  6. Three pairs of brushes (Ø150mm) stainless steel shaft construction (low-e glass, regular coated glass, and sunshine coated glass can be cleaned without damaging the coated surface).

  7. Two sets of special stainless steel aluminum alloy air knife configuration, strong wind, excellent air drying effect, with heating system (with temperature control, optional opening and closing).

  8. The fan is equipped with an air filter in the air inlet chamber, which has a large amount of air and has a good air drying effect. The entire fan box is installed at the top of the workshop and has an air filter screen on the side for easy inspection. And cleaning;

  9. Gear transmission, frequency control, main drive of digital display, rotation of brush roller in cleaning section are driven by independent belts of upper motor and lower motor respectively, frequency conversion adjustment speed is stable, Achieves highly demanded cleaning of special glass with a long service life;

  10. Mechanical button control, washing machine digital display, easy to operate, easy to operate, easy to maintain.

  11. Clean the water tank of the outside washing machine, convenient water tank, change water, check, clean the washing machine.

  12. PLC control, optional with touch screen display. Convenient for operator operation and maintenance, it can be connected to all manufacturers of edge grinders without gaps. (Please purchase separately if necessary)

Technical parameters:

1. Maximum glass width: 2500mm (effective maximum: 2650mm)

2. Minimum glass specifications: 400 mm x 400 mm (limited to one row on the left and right)

3. Glass thickness: 3mm-25mm (digital display)

4. Velocity range: Glass thickness within 3-25mm Vmax = 1-12m / min

5. Main drive, brush speed adjustment method: Frequency control

6. Table height: 900 ± 25mm

►►►Stainless Steel parts showing

►►►The drying section is composed of 2 sets of high-pressure professional air knives.

►►►Glass washer installition in workshop

We can offer 1-section cleaning, 2-section cleaning, or multi-section cleaning.